Need help?Do you have a question about the Litecraft WashX.432 SW and is the answer not in the manual?
Key responsibilities and instructions for safe operation.
Important precautions regarding electrical shock and device handling.
Essential instructions for preventing damage and ensuring warranty.
Warning about high housing temperatures during operation.
Caution against direct light exposure and handling by unqualified persons.
Defines the product as a spotlight for professional stage use and outdoor applications.
Advises on avoiding shocks, managing environment, and securing cables.
Details minimum distances, securing the unit, and keeping away from children.
Clarifies lifespan refers to LEDs, not other components.
Mentions regulations like DGUV V17/18 and need for skilled persons.
Details requirements for suspension devices, safety chains, and load limits.
Emphasizes experience needed for overhead installation and professional systems.
Stresses checking mounting surface load capacity and safety distances.
Explains how to attach the spotlight using yoke, hook/clamp, and safety chain.
States connection must be by skilled persons and requires electrical grounding.
Regular checks of installations, screws, and power cords by skilled persons.
How to clean the fixture using a damp cloth, avoiding solvents.
Notes no internal parts need maintenance; service by authorized dealers only.
Explains device modes, DMX controller connection, and start address.
Details connecting a master device to a slave device via DMX.
Describes the display layout and how to navigate menus using buttons.
Explains using jogwheels for brightness/macro control when no DMX signal is present.
Describes plugging in the optional CRMX module and setting DMX modes.
Explains how to pair the unit with an external DMX transmitter and release connections.
How to reset all parameters to factory defaults using DEF. SET.
How to set the DMX start address for communication.
How to choose the DMX channel mode (e.g., 2ch mac, 2ch sw).
Setting the device to operate as a Master or Slave.
Setting brightness using the jogwheel and saving the value.
Selecting and storing pre-programmed smartwhite macros.
Lists available SW macros and their color temperatures for 2 channel mode.
Details coldwhite and warmwhite dimmer functions for 2 channel mode.
Details optics, beam angle, LED type, colors, lifespan, and color mixing.
Specifies ambient temperature limits and cooling method.
Lists DMX channels, internal memories, display type, and connection options.
Covers mains voltage, power consumption, housing material, color, and IP rating.
Provides dimensions, weight, and mounting type.
Declares conformity with Low Voltage Directive 2014/35/EU based on listed standards.
Declares conformity with EMC Directive 2014/30/EU based on listed standards.
To Next Page
General