LiteHawk Click Auto User Manual

A
A
B
B
10+
Quick Tip - White blades and LED lights in the
front with red blades and LED lights at the rear.
This helps you know which is the front and which is
the rear!
Quick Tip - blade directions are shown to the
right. Each blade has an “A” or “B” stamped on it.
Make sure replacement blades go to the proper
motor or your model will not fly properly.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY RETAIL STORE.
For any questions or problems with this product please visit our website www.litehawk.ca
Made for and distributed by Borgfeldt (Canada) Limited 50 Konrad Cres., Markham, ON L3R 8T4
LiteHawk CLICK AUTO Instruction Manual
www.litehawk.ca
R

LiteHawk Click Auto Specifications

General

Brand	LiteHawk
Model	Click Auto
Category	Drones
Control	Remote Control
Camera	No
Battery Type	LiPo
Skill Level	Beginner
Type	Quadcopter

Summary

General Safety and Battery Precautions

Safety Precautions

General safety guidelines for operating the drone and controller.

Battery Safety Information

Information on battery types, handling, and proper disposal.

Li-Po Battery Charging Instructions

Specific instructions and warnings for charging the Li-Po battery.

Transmitter Setup

Battery Installation

Controller Functions Overview

Drone Control Operations

Charging and Syncing Procedures

How to Charge the CLICK AUTO

Step-by-step guide on charging the drone's Li-Po battery.

How to Sync the CLICK AUTO

Process for binding the drone to the controller for first use.

First Flight Operations

Altitude Hold and Auto Functions

First Flight Guidance

Post-Flight Procedures

Powering Down and Battery Cooling