2
1
2
PRODUCT VARIANTS
:
1.1 SL900 / SL900C SPEED LIMITER
SL900 Speed Limiter will operate solely as a speed limiter to 1 preprogrammed
fixed maximum speed value. The programming of the Speed Limit needs to be
executed during the product installation by an authorized dealer.
Adding a Command Module to this device will give the product the additional
functionality to set, increase, decrease, resume, memorize and cancel other speed
limit values below the fixed maximum speed limit. Follow the operating
instructions described in chapter 3.
For safety the driver can override the self set speed limit by pressing the
accelerator pedal fast to its maximum.
1.2 AP900/AP900C CRUISE CONTROL & SPEED LIMITER
The AP900 / AP900C is featuring the same Speed Limiter functionality as the
SL900 / SL900C and also offers a comprehensive Cruise Control.
One touch of the ON command key will activate the Cruise Control, and when
switched off an over 1 second press & hold of the ON command key will activate
the Speed Limiter. Activation of both functions will be confirmed via a buzzer
with respective 2-low beeps and 1-low-2-high beeps.
With the system setup as fixed Speed Limiter, the Cruise Control will also not be
able to engage above the fixed maximum speed value. Speed Limits programmed
with the command module can be exceeded by the Cruise Control.
With the system setup as Speed Alert, the Speed Limiter function will be disabled.
The Cruise Control will be able to engage above the set Speed Alert value but will
give the warning (3 high tone beeps) when this speed value is passed.
The operation of the Cruise Control is identical to the other LITE-ON Cruise
Controls. Follow the operating instructions described in chapter 3.
1
9
Dealer address details:
To Next Page
Loading...