30
GUI Operation
Audio
Digital Output
Settings of digital audio output.
PCM (Enable digital audio output with PCM data)
Bit Stream (Enable digital audio output with encode data)
DTS Output
Enable/Disable Digital Theater System output.
ON (Enable Digital Theater System mode)
OFF (Disable Digital Theater System mode)
TV Tuner
TV Signal ---> Antenna, Cable or auto
(Select the type of antenna input)
Country ---> Select your location
Utilities ---> Start Scan or Add/Delete or Swap
(Select to start rescaning channel or add/delete a channel
or to swap the TV channel )
Fine --> -24 ~ -1 0 +1 ~ +24
(Select to fine-tune the channel frequency manually)
Firmware update
As the firmware is continuously refined for greater
stablity and compatiblity of the player, user may
update the latest firmware form http://www.liteonit.
com/DC/english/download.htm
All operations are written in PDF file. Please follow the
instructions step by step to complete the firmware
update.
Caution:
Improper firmware update may cause malfunction
of the system.
To Next Page
Loading...
