To Next PageTo Next Page
Need help?Do you have a question about the Little Cottage Colonial Gable Greenhouse and is the answer not in the manual?
General| Type | Greenhouse Kit |
|---|---|
| Style | Colonial Gable |
| Glazing Material | Polycarbonate |
| Assembly Required | Yes |
| Cover Material | Polycarbonate |
| Base Material | Steel |
Lists necessary tools and provides initial guidance for starting the assembly process.
Assemble the base frame using 4x4 runners and 2x4 joists according to measurements.
Attach plywood sheeting to the floor frame, ensuring squareness and proper screw placement.
Position and secure the first wall panels to the floor base, ensuring flush edges.
Install subsequent wall panels, ensuring alignment and securing them to each other and the base.
Fit the end wall panels and reinforce connections, ensuring structural integrity of the walls.
Measure door opening, remove temporary bracing, and prepare the door panel for installation.
Install top plates, corner trim, window trim, and commence door hardware attachment.
Construct roof trusses with gussets and install the gable end walls onto the structure.
Attach purlins along the trusses and install bird blocks for added support and alignment.
Install rake blocks, soffit siding, and begin fitting the ridge enclosures and cap.
Assemble and install the interior shelf sections at the specified heights.
Complete ridge cap installation and confirm all components are securely fastened, finishing the build.
