Features
n Automatic or manual operation
n Epoxy coated die-cast aluminum housing
n Oil-filled motor
n 26.3' maximum lift
n 380 watts
n 1" FNPT discharge
n Thermal overload protection
n ASP On level: 6"–9", Off level: 1"–4"
n ASP-LL On level: 2"–3", Off level: ½"–1½"
n Piggyback diaphragm switch
n For submersible use only
Construction
n Motor — 1/6 HP oil filled
Intermittent Liquid Temp. up to — 120°F
Intake — Screened
Discharge — 1" MNPT
Housing — Epoxy coated cast aluminum
Cover — Epoxy coated cast aluminum
Volute — Nylon
Impeller — Nylon
Shaft Seal — Viton
®
Screen — Nylon
Submersibles
5-ASP Series
Automatic/Manual submersible utility pump with oil-filled motor and epoxy coated cast aluminum housing. For
commercial, industrial and home applications where liquid must be transferred or recirculated. Pumps down to 1/8" in
manual mode operation. This 1200 GPH pump features a 1" FNPT discharge with garden hose adaptor, 26.3' shut-off
head capability, and screened inlet.
To Next Page
Need help?
General
