Little Martin’s BFD1609

Questions and Answers

S
Steven HendrixAug 3, 2025
Why do random values appear on the LCD of my Little Martin’s Medical Equipment?
- R
  Randy HarrisAug 3, 2025
  Random values may appear on the LCD of your Little Martin’s Medical Equipment due to several reasons: * Friction between the probe and abdomen skin during the search for the fetal heart can cause incorrect readings. Applying a coupling agent may resolve this. * Electromagnetic interference from sources like high-frequency generators or cellphones can also cause this issue. Try using the device in an area free from such interferences. * Fetal movement can change the position of the fetal heart. Adjust the probe to the location where the fetal heartbeat sound is loudest.
K
kimberly63Aug 13, 2025
How to fix too much noise using Little Martin’s Medical Equipment?
- K
  Kristen BurgessAug 13, 2025
  Excessive noise when using your Little Martin’s Medical Equipment can be addressed by: 1. Applying a coupling agent, if you aren't already. 2. Avoiding direct probe contact with the skin while searching for the fetal heart. Find the optimal angle between the probe facet and the abdomen skin for the clearest sound. 3. Ensuring the probe is correctly positioned to detect the fetal heart.
Y
ycollinsAug 22, 2025
Why won't my Little Martin’s Medical Equipment turn on?
- J
  Joshua JenkinsAug 22, 2025
  If your Little Martin’s Medical Equipment doesn't react when you press the power button or if it powers off prematurely, the following could be the reasons: * The battery may be low, so try replacing it. * The battery might not be making good contact; ensure it is properly connected. * The battery may be inserted incorrectly; check the placement. * There may be device failures, consider sending the device back to the manufacturer for repair.