25
MEET THE ACCESSORY
HOW IT WORKS
a10 MOTORMATE
The motorMate makes
it easy to attach paper,
cardboard, LEGO
®
axles,
and lots of other materials to
the DC motor.
To mount, slide the motorMate
onto the shaft of the DC
motor by aligning the flat
edges. The motorMate has
two dierent sized slots: one
ts most standard craft sticks
and the other fits thicker
papers like cardstock. LEGO
axles t right into the center.
Flat edge
micro USB
MEET THE ACCESSORY
HOW IT WORKS
a14 USB POWER ADAPTER & CABLE
This power adapter and
USB cable combo is the
perfect way to provide
long-term power to your
littleBits creations.
This power adapter converts
your 120 volt wall power
into the 5 volt power that
littleBits circuits run on.
Simply connect the cable
from the power adapter to
your littleBits USB power Bit
(this only connects to the p3
USB power Bit). You can
also use the USB cable to
power your circuits from a
computer or rechargeable
USB battery.
NOTE: Input: 100–240V AC
50/60Hz; Output: 5.0V DC
2000mA. Included adapter is
for US electrical outlets only.
To Next Page
Loading...