5
Learn more about your Bits in the BIT INDEX ON PG 06
MAGNET MAGIC!
Bits snap together with magnets. The magnets are
always right – you can’t snap them together the
wrong way.
3
ARROWS SHOULD POINT IN THE SAME DIRECTION
IF THE BITS WON’T SNAP TOGETHER, TRY SPINNING
ONE AROUND AND MAKE SURE THE ARROWS POINT
IN THE SAME DIRECTION
ORDER IS IMPORTANT
POWER BITS always come rst and INPUT BITS
only aect the OUTPUT BITS that come after them.
4
WITH NO OUTPUT BIT AFTER IT, THE INPUT BIT HAS NOWHERE
TO SEND ITS SIGNAL
THE INPUT BIT AFFECTS THE OUTPUT BITS THAT FOLLOW
SOME BITS ARE ADJUSTABLE
Switches, buttons, and dials on the board allow
you to change how the Bit functions.
5
FLIP THE SWITCH TO CHANGE MODES
ADJUST SENSITIVITY WITH
PURPLE SCREWDRIVER
To Next Page
Loading...