Need help?Do you have a question about the Livart LPAC12CRWGR and is the answer not in the manual?
General| Cooling Capacity | 12000 BTU |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Noise Level (Indoor) | 40 dB |
| Noise Level (Outdoor) | 52 dB |
| Operating Temperature (Cooling) | 18°C to 43°C |
Read and follow all safety rules before operating. Ensure proper ventilation and avoid hazardous locations.
Instructions regarding damaged power cords, socket outlets, and general electrical safety.
Identifies key components like operation panel, louvers, and carrying handles visible from the front and side.
Details rear and bottom parts including air inlets, outlets, drain plugs, and power cord.
Includes exhaust duct, adapter A for permanent mounting, and adapter B for temporary mounting.
Lists expansion plug, power cord band, drain hoses, and window slider kit.
Explains the function of buttons like Timer, Mode, Fan Speed, and indicator lights on the control panel.
Explains the digital display, water full indicator, and how to switch between Celsius and Fahrenheit.
Steps for selecting location, installing hose/kit, and electrical requirements before starting.
Instructions for COOL, DRY, HEAT, FAN modes and setting ON/OFF timers for automatic operation.
Steps to remove and empty the internal water tank when it's full during cooling or dehumidifying modes.
Instructions for continuous drainage using a drain hose, noting potential impact on cooling capacity.
Guidance on installing the window slider kit for vertical and horizontal window applications.
Advice on unit placement clearance, avoiding laundry use, and ensuring plug accessibility.
Instructions for temporary and permanent exhaust duct installation using adapters and expansion plugs.
Explains the 'P1' indicator and red light when the water tank is full or misplaced.
Procedure for cleaning the air filter, including removal, washing, drying, and mounting.
Tips for cleaning the unit enclosure and preparing the unit for long-term idle periods.
Addresses problems like unit not starting, not cooling, and overheating with possible causes and remedies.
Explains noisy operation, gurgling sounds, and issues related to compressor indication 'P2'.
Details the one-year limited warranty, covered defects, and common exclusions like misuse and wear.
Provides contact information, including address, phone, fax, and business hours for warranty or defect concerns.
To Next Page