How to fix LIVERYMAN BLACK BEAUTY Commercial Food Equipment blades that won't clip?
If the blades on your LIVERYMAN Commercial Food Equipment aren't clipping, start by removing the blades and cleaning them to eliminate any hair or dirt. Then, oil and reassemble them. If the blades are blunt, have them re-sharpened. Make sure you are oiling the blades regularly, every 5-10 minutes. Finally, ensure the blades are correctly tensioned.
What to do if my LIVERYMAN BLACK BEAUTY has no power?
If your LIVERYMAN Commercial Food Equipment isn't powering on, first ensure all connections are firmly in place—check the clipper, the mains adapter plug, and the socket. Verify the mains socket is switched on. Try plugging the mains adapter into a different socket. If it still doesn't work and the electricity supply is fine, it may require professional service.
Why are the blades on my LIVERYMAN Commercial Food Equipment overheating?
If the blades on your LIVERYMAN Commercial Food Equipment are overheating, regularly oil the blades every 5-10 minutes. Also, ensure that you tension the blades correctly, and remember to switch the equipment off when not actively clipping an animal's coat to prevent overheating.
What causes the motor to overheat on my LIVERYMAN BLACK BEAUTY?
If the motor of your LIVERYMAN Commercial Food Equipment overheats, ensure that the blades are correctly tensioned. Check the air vents and clean them if they are blocked. If the blades are blunt, replace them.
Why is my LIVERYMAN BLACK BEAUTY so noisy?
If your LIVERYMAN Commercial Food Equipment is noisy, first, clean the clipper, then oil and re-tension the blades. If over tensioning is the issue, re-tension them correctly. Also, ensure the blades are sharp, and replace badly worn blades.
General| Brand | LIVERYMAN |
|---|---|
| Model | BLACK BEAUTY |
| Category | Commercial Food Equipment |
| Language | English |
Details on battery pack capacity, running time, charging input, cells, power display, dimensions, and weight.
Information regarding the clipper's compliance with relevant European Directives and Standards.
Explanation of the variable speed switch for clipper speeds between 1500 and 2700 rpm.
Step-by-step instructions for operating the clipper using mains power.
Instructions for connecting and operating the clipper with the battery pack.
Guidance on how to charge the clipper's battery pack safely and effectively.
Common clipper issues like blades not clipping, overheating, motor issues, no power, and noise, with their causes and actions.
Solutions for battery pack issues such as no power, low battery, or no power after charging.
Guidelines for maintaining and storing the battery pack to ensure longevity and performance.
To Next Page
