The living&co. UV LED Nail Lamp, Model SUN9S, is a personal domestic appliance designed for fast curing of nail coatings compatible with LED UV type lamps. It is not intended for commercial applications.
Function Description:
The primary function of this device is to cure gel nail polish using UV LED light. It features an automatic sensor that activates the LED lamps when a hand or nails are placed under the arch. A digital timer display shows the elapsed time in seconds, with a maximum default operation time of 99 seconds, after which the unit automatically switches off. If additional curing time is needed, the user simply removes and re-places their hand/nails.
Important Technical Specifications:
- Timer: Maximum 99 seconds
- Power: Maximum 12 W
- Mains Power Adaptor (Model XH1200-1000LA):
- Input: 100-240 V ~ 50/60 Hz, 0.5 A
- Output: 12V DC, 1 A
- Bulb Type: LED (non-replaceable)
- LED Bulb Lifespan: Approximately 40,000 hours
Usage Features:
- Ease of Use: Simply plug in the mains power adapter, connect it to the nail lamp, and place the lamp on a flat surface. The automatic sensor activates the LED lamps when hands are placed underneath.
- Automatic Shut-off: The device automatically switches off after 99 seconds, preventing over-curing and conserving energy.
- Digital Timer Display: Provides real-time feedback on curing duration.
- Nail Preparation: The manual emphasizes proper nail preparation for optimal gel polish adhesion, including cleaning, drying, and pushing back cuticles.
- Application Tips: Recommends applying gel to thumbs first, then the remaining four nails on one hand, and repeating for the other hand. Advises applying thin, precise layers and removing excess product from the brush by circling the inside neck of the bottle.
- Post-Curing: Notes that a slight moisture layer may remain after curing, which should be removed with a gel cleanser or a lint-free wipe with 91% alcohol.
- Protection: Suggests applying a thin layer of gel base & top coat, ensuring it doesn't touch cuticles or skin, and capping the free edge of the nail. Curing for 30 seconds is recommended for this step.
- Compatibility: The lamp works exclusively with gel polishes (UV and LED nail dryers). It is not suitable for regular nail polish, which should be air-dried or used with a quick-dry top coat.
- Troubleshooting: Provides guidance for common issues such as the device not working (checking connections, socket, and run time) and smoke emission (immediately unplugging and contacting customer service).
- Safety Warnings:
- Electric Shock: Do not allow contact with liquids, immerse the device, or touch with wet hands when connected to mains power. Disconnect immediately if it falls into water.
- Damage/Inappropriate Use: Ensure the mains socket is accessible. Switch off and unplug immediately in case of damage, unusual noises, odor, or smoke. Switch off when plugging/unplugging the mains adapter.
- Injury: Keep the supply cable out of reach of children and animals to prevent strangulation. Use and store out of reach of children and animals. Protect from heat, naked flames, direct sunlight, extreme temperatures, moisture, and collisions.
- UV Light Exposure: Never look directly at the UV light, as long-term exposure can damage eyes and skin.
- Reduced Capabilities: Not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised. Children must be supervised.
- Pain During Curing: Explains that mild pain can occur due to nail polish burning during curing, frequent application reducing nail thickness, or polish sticking to skin. Advises removing fingers if pain occurs.
Maintenance Features:
- Cleaning:
- Always disconnect from mains power before cleaning.
- Do not use caustic or abrasive cleaning agents.
- Wipe down with a damp cloth, then dry fully with a dry cloth.
- Storage:
- Store in a dry location between 0 and 40°C.
- Ensure the device is switched off and the mains adapter is removed from the socket outlet when not in use.
- Store in its original packaging in a clean, dry place, protected from dust and sunlight, and inaccessible to children and animals.
- Disposal:
- Dispose of packaging material in an environmentally friendly manner at a recycling center.
- Dispose of the device itself in an environmentally friendly manner at a recycling center for used electrical and electronic devices, not with general household waste. Contact local council for details.
Warranty:
The product comes with a 1-year warranty, accompanied by proof of purchase. Customer Helpline NZ: 0800 422 274.
Need help?
General
To Next Page