What to do if my LIVING BASICS LB-YDZ-50P does not run?
If your LIVING BASICS Dehumidifier isn't running, first ensure the power plug is properly inserted into the socket. Also, check if the water tank is full or incorrectly positioned; if so, drain the tank and reinstall it correctly. Note that the unit might not run if the ambient temperature is below 5°C or above 32°C, which is normal.
Why is my LIVING BASICS LB-YDZ-50P Dehumidifier not dehumidifying effectively?
If your LIVING BASICS Dehumidifier isn't effectively dehumidifying, it could be due to low room temperature or humidity, which reduces its ability to dehumidify, especially in dry seasons. Also, check if the air outlet and inlet are blocked; if so, clear any obstructions.
How to fix abnormal noise during LIVING BASICS Dehumidifier operation?
Abnormal noise during operation of your LIVING BASICS Dehumidifier can be caused by a few things. First, ensure the dehumidifier is placed on a smooth, stable surface. Also, check if the air strainer is blocked and clean it if necessary. A “tittering” sound might also be heard, which is the normal flowing sound of refrigerant.
What to do if my LIVING BASICS Dehumidifier leaks water?
If your LIVING BASICS Dehumidifier is leaking water, check the drainage pipe connection to ensure it is fastened securely. Also, inspect the drainage system for any blockages and remove any obstacles, straightening out the water pipe as needed.
Why is no air blowing out of my LIVING BASICS LB-YDZ-50P Dehumidifier?
If no air is blowing out of your LIVING BASICS Dehumidifier, the air strainer may be blocked. Clean the air strainer.
Why is my LIVING BASICS Dehumidifier frosting?
Frosting on your LIVING BASICS Dehumidifier is normal if the ambient temperature is low. The dehumidifier has an automatic defrosting function.
Installing the activated carbon filter in the filter frame for proper operation.
Maintaining minimum distances around the unit for ventilation and noise reduction.
Setting the timer and choosing operating modes (AUTO, CONTINUOUS, DRYING).
Using Dry key, Air Speed, Humidity setting, On/Off, and interpreting the LCD.
Setting the timer for the dehumidifier to turn on or off.
Details on AUTO, CONTINUOUS, and DRYING modes.
Utilizing the pump for continuous drainage and activating air swing.
Procedure for emptying the water tank when it is full.
Connecting a drainage pipe for continuous water removal.
General| Model Number | LB-YDZ-50P |
|---|---|
| Category | Dehumidifier |
| Power Consumption | 650W |
| Color | White |
| Dehumidification Capacity | 50 Pints |
| Coverage Area | 3000 sq ft |
| Tank Capacity | 6L |
| Operating Temperature | 41°F - 95°F |
To Next Page