Living Fire Ilektro Series - User Manual

USER INSTRUCTIONS AND
INSTALLATION
IMPORTANT
THE HEATER OUTLET GRILLE BECOMES VERY HOT WHILST IN OPERATION.
DO NOT COVER THE OUTLET GRILLE OR ANY PART OF THE APPLIANCE.
FOR USE WITH 230V - 240V 50HZ ELECTRICITY SUPPLY ONLY.
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
KEEP THE INSTRUCTIONS IN A SAFE PLACE.
THEY WILL BE NEEDED WHEN MAINTENANCE OR SERVICING IS REQUIRED.
THIS APPLIANCE MUST BE EARTHED

Summary

IMPORTANT SAFETY INFORMATION

OPERATING INSTRUCTIONS

REMOTE CONTROL AND SETTINGS

Using the remote for flame, heat, light, colour, and advanced settings.

MAINTENANCE AND CARE

TECHNICAL SPECIFICATION

GENERAL INSTALLATION

INSTALLATION OPTIONS AND POSITIONING

Different installation methods, options, and positioning guidance.

SETTING THE FUEL BED

ELECTRICAL CONNECTION

SERVICING GENERAL INFORMATION

FAULT FINDING

SERVICING REQUIREMENTS

COMPONENT REMOVAL AND REPLACEMENT

Procedures for removing glass, LEDs, fans, heater, and other parts.

WIRING DIAGRAM

ENCLOSURE DIMENSIONS

APPLIANCE DIMENSIONS

Living Fire Ilektro Series Specifications