What to do if my LIVINOX LCH-NITE-90BL has poor airflow?
If your LIVINOX Ventilation Hood has poor airflow, the aluminum grease filters may be clogged. Clean the filters and replace them when dry. Alternatively, the charcoal grease filters may be clogged, in which case you should replace them with a new set.
Why is my LIVINOX LCH-NITE-90BL Ventilation Hood dripping oil onto the stove?
If your LIVINOX Ventilation Hood is dripping oil onto the stove, it could be due to a missing or uninstalled oil cup. Remove the aluminum filter and replace the oil cup. Another possible cause is saturated aluminum grease filters. Wash the aluminum grease filters.
Why does my LIVINOX Ventilation Hood motor cut off after a few minutes?
If the motor of your LIVINOX Ventilation Hood cuts off after a few minutes, it could be because the high temperature safety device has been activated. This suggests that the kitchen is not sufficiently ventilated. Another cause may be that the hood is installed too near the cooking stove. The hood must be at least 65cm from the stove.
How to fix strong cooking smell with LIVINOX Ventilation Hood?
If you notice a strong cooking smell when using your LIVINOX Ventilation Hood, it is possible that the charcoal filters are not installed. Ensure that charcoal filters are installed when operating in re-circulating mode.
General| Model | LCH-NITE-90BL |
|---|---|
| Category | Ventilation Hood |
| Width | 90 cm |
| Color | Black |
| Number of Motors | 1 |
| Control Type | Touch Control |
| Lighting | LED |
| Number of Speed Settings | 3 |
| Material | Stainless Steel |
| Filter Type | Baffle Filter |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Type | Wall Mounted |
To Next Page