EasyManua.ls Logo

LIVINOX LCH-COPPERDC-90BL - User Manual

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
LCH-COPPERDC-90BL
User Manual

Questions and Answers

  • A
    Amy SingletonAug 3, 2025
    What to do if my LIVINOX Ventilation Hood has poor airflow?
    • G
      Gavin DavisAug 3, 2025
      If your LIVINOX Ventilation Hood has poor airflow, the aluminum grease filters may be clogged. Clean the filters and replace them when dry. Alternatively, the charcoal grease filters may be clogged, in which case you should replace them with a new set.
  • A
    Aaron ClarkAug 7, 2025
    Why is my LIVINOX Ventilation Hood dripping oil onto the stove?
    • S
      Shawn KingAug 7, 2025
      If your LIVINOX Ventilation Hood is dripping oil onto the stove, it could be due to a missing or uninstalled oil cup. Remove the aluminum filter and replace the oil cup. Another possible cause is saturated aluminum grease filters. Wash the aluminum grease filters.
  • A
    Andrew FlowersAug 12, 2025
    Why does my LIVINOX LCH-COPPERDC-90BL Ventilation Hood motor cut off after a few minutes?
    • A
      Andrea DelacruzAug 12, 2025
      If the motor of your LIVINOX Ventilation Hood cuts off after a few minutes, it could be because the high temperature safety device has been activated. This suggests that the kitchen is not sufficiently ventilated. Another cause may be that the hood is installed too near the cooking stove. The hood must be at least 65cm from the stove.
  • J
    Joseph CookeAug 16, 2025
    How to fix strong cooking smell with LIVINOX Ventilation Hood?
    • M
      Matthew MedinaAug 16, 2025
      If you notice a strong cooking smell when using your LIVINOX Ventilation Hood, it is possible that the charcoal filters are not installed. Ensure that charcoal filters are installed when operating in re-circulating mode.
  • M
    mary74Aug 20, 2025
    How to troubleshoot a LIVINOX LCH-COPPERDC-90BL Ventilation Hood that won't start?
    • V
      Victoria TaylorAug 20, 2025
      If your LIVINOX Ventilation Hood won't start, check that the main switch is turned on and that the plug is properly connected to a power source.
  • M
    mwebbAug 25, 2025
    What to do if my LIVINOX LCH-COPPERDC-90BL motor is running but there is no airflow?
    • C
      Chelsea MirandaAug 25, 2025
      If the motor of your LIVINOX Ventilation Hood is running but there is no airflow, the butterfly valve may be jammed. Contact a technician for assistance.
  • A
    Amy AcostaAug 29, 2025
    What to do if my LIVINOX LCH-COPPERDC-90BL Ventilation Hood is making a whirring sound?
    • M
      Melissa LongAug 29, 2025
      If your LIVINOX Ventilation Hood is making a whirring sound, there might be a foreign object in contact with the fan blade. Contact a technician for assistance.

Summary

From the Manufacturer

FOR THE USER

Safety Instruction

Key safety warnings and precautions before operating the appliance, including fire risks and ventilation requirements.

Installation

Guidelines for proper installation by qualified technicians, including ventilation, location, and electrical connections.

Intended For Household Use

Specifies that the product is for domestic use only and provides usage precautions.

Cleaning, Maintenance & Service

Electrical Cord

Instructions for ensuring the electrical cord is protected from damage and proper replacement if damaged.

Hood Description

Ducted or Re-circulating mode

Explanation of the two operating modes: ducted for external venting and re-circulating with filters.

Speed Control

Details on how to use the appliance's speed controls for different cooking intensities.

Dimension Diagrams

Side Suction Range Hood

Illustrates the physical dimensions and specifications of the side suction range hood model.

Touch Control

Cleaning & Maintenance

Procedures for cleaning surfaces and filters, emphasizing safety and the use of appropriate cleaning agents.

Installation

Slim model

Step 1

First stage of installation for the slim model, involving wall mounting and securing the hood.

Step 2

Second stage of installation for the slim model, focusing on cupboard mounting and gap adjustment.

Notes

Vertical ventilation

Details on how to set up the appliance for vertical air exhaust, including cover removal.

Horizontal ventilation

Instructions for configuring the appliance for horizontal air venting through the back.

Built-in Mounting Installation

Step 1

First step for built-in installation: ensuring correct cut-out size and attaching the back draft base.

Step 2

Second step for built-in installation: securing the undermount unit into the cavity using screws.

Step 3

Third step for built-in installation: connecting electrical connectors and inserting the light bulb and filter.

Installation (Vent inside)

Guidance for internal venting installation when an external outlet is not available.

Activated Carbon Filter

Important Notes

Key considerations for filter installation, electrical connection, appliance operation, and maintenance.

FOR THE INSTALLER

Safety Information

Crucial safety rules for electrical connections, wiring, and lamp replacement relevant to installers.

Wire Color Codes

Identifies the standard wire color assignments for Earth, Neutral, and Live connections.

Trouble shooting

LIVINOX LCH-COPPERDC-90BL Specifications

General IconGeneral
BrandLIVINOX
ModelLCH-COPPERDC-90BL
CategoryVentilation Hood
TypeChimney
Size90 cm
Width90 cm
ColorCopper
MaterialStainless Steel
Motor TypeDC Motor
Number of Motors1
Control TypeTouch Control
LightingLED
Number of Lighting Levels2
Filter TypeBaffle Filter
Installation TypeWall Mount
Voltage220-240 V
Frequency50/60 Hz

Related product manuals