This document is an instruction manual for the Livoo Double Induction Hob, model DOC236. It provides comprehensive information on the appliance's function, technical specifications, usage, and maintenance.
Function Description
The Livoo Double Induction Hob is designed for household cooking. It features two independent induction cooking zones, allowing for simultaneous cooking. The appliance utilizes induction heating technology, which directly heats the cookware through electromagnetic fields, making it energy-efficient and responsive. Each cooking zone has its own touch control panel for adjusting power, temperature, and timer settings. The hob is equipped with safety features such as a pan detector, child lock, and warnings for hot surfaces.
Important Technical Specifications
- Model Identification: DOC236
- Type of Hob: Electric hob
- Number of Cooking Zones: Two cooking zones
- Heating Technology: Induction cooking zones
- Voltage: 220-240V~50-60Hz
- Total Power: 3500W
- Left Cooking Zone:
- Power: Adjustable from 200W to 2000W (default 1600W)
- Temperature: Adjustable from 60°C to 240°C (default 200°C)
- Diameter of Useful Surface Area: 21.5 cm
- Right Cooking Zone:
- Power: Adjustable from 200W to 1500W (default 1600W)
- Temperature: Adjustable from 60°C to 240°C (default 180°C)
- Diameter of Useful Surface Area: 21.5 cm
- Timer Range: 1 to 180 minutes
- Energy Consumption per Cooking Zone (calculated per kg):
- Right zone: 183.7 Wh/kg
- Left zone: 184.2 Wh/kg
- Energy Consumption for the Hob (calculated per kg): 184.0 Wh/kg
- Compatible Cookware: Steel, cast iron, enameled iron, stainless steel, flat-bottom pans/pots with a bottom diameter from 12cm to 26cm.
Usage Features
The Livoo Double Induction Hob offers intuitive touch controls for various cooking functions:
- Power On/Off: A dedicated button to turn the appliance on and off. Upon plugging in, a beep sounds, and all control lights activate briefly. Pressing the on/off button displays "C" on the LED.
- Cooking Mode:
- Place a suitable pot/pan on the plate.
- Press the "setting" button until the display shows a wattage (default 1600W for both burners).
- Adjust power using the "+" and "-" buttons. The left burner can be set from 200W to 2000W, and the right burner from 200W to 1500W.
- To cancel, press the setting button to switch modes or the on/off button to stop.
- Temperature Setting:
- Press the "setting" button until the "C°" indicator lights up. The display will show a default temperature (200°C for the left burner, 180°C for the right burner).
- Adjust temperature using the "+" and "-" buttons, ranging from 60°C to 240°C.
- To cancel, press the setting button to switch modes or the on/off button to stop.
- Timer Function:
- Press the "timer" button; it lights up, and the display shows a default time of "10" minutes.
- Adjust the time using the "+" (10-minute increments) and "-" (1-minute increments) buttons, within a range of 1 to 180 minutes.
- Press the "timer" button again to confirm, or wait for the display to stop flashing.
- When the timer expires, the appliance beeps and enters standby mode.
- To cancel the timer, press the on/off button to return to standby or hold the timer button to resume the selected power/temperature.
- Child Lock Function:
- To lock all keys, press "+" and "-" simultaneously.
- To unlock, press and hold "+" and "-" simultaneously for 3 seconds.
- Alternatively, pressing the "ON/OFF" key will switch to standby mode, allowing new functions to be set.
- Keep Warm Function: A dedicated button is available for the "Keep Warm" function, indicated by a symbol on the control panel.
Maintenance Features
Proper cleaning and storage are essential for the longevity and safe operation of the appliance:
- Cleaning:
- Always unplug the appliance and allow it to cool down completely before cleaning.
- Wipe the surfaces with a moistened cloth.
- Do not use abrasive items or liquids, as these can damage the appliance.
- Never immerse the appliance in water or any other liquid.
- A steam cleaner should not be used.
- It is crucial to keep the appliance clean, especially surfaces in direct contact with food.
- Storage:
- Ensure the appliance is clean and dry before storing.
- Unwind the power cord flat to prevent superheating of the appliance.
- Store in a safe place, out of reach of children.
Safety Instructions and Warnings
The manual emphasizes several critical safety points:
- General Safety:
- Intended for household use only; outdoor use is forbidden.
- Verify wall outlet voltage matches the appliance's rated voltage.
- Can be used by children aged 8 and above and persons with reduced capabilities if supervised and instructed.
- Children should not play with the appliance or perform cleaning/maintenance without supervision.
- Keep the appliance and cord out of reach of children under 8 years.
- Never leave the appliance unsupervised when in use.
- Ensure the appliance inlet is dry before use.
- Damage and Malfunction:
- Do not use if the power cord is damaged, if it operates poorly, if it has been damaged in any manner, submerged in water, or dropped.
- A damaged supply cord must be replaced by the manufacturer, service agent, or similarly qualified persons.
- If the surface is cracked, switch off the appliance immediately to avoid electric shock.
- Handling and Environment:
- Never immerse the appliance in water or any other liquid; do not place it in a dishwasher.
- Do not operate with wet hands.
- Never unplug by pulling the cord.
- Do not place on or near a hot gas burner or heated oven.
- Do not operate near water sources or flammable liquids.
- Do not clean or touch when hot.
- After use, switch off the hob element by its control; do not rely on the pan detector.
- Metallic objects (knives, forks, spoons, lids) should not be placed on the hob surface as they can get hot.
- Do not store items on cooking surfaces (danger of fire).
- Cooking Specifics:
- Unattended cooking with fat or oil can be dangerous and lead to fire.
- NEVER try to extinguish a fire with water; switch off the appliance and cover the flame with a lid or fire blanket.
- Cooking processes must be supervised continuously, especially short-term cooking.
- The appliance is not intended to be operated by an external timer or separate remote control system.
- Post-Use:
- After use, switch off the appliance. Do not unplug immediately; a 1-minute pre-set fan continues to cool the unit. Unplug after the cooling fan stops.
Troubleshooting
The manual includes a troubleshooting guide for common issues and error codes:
- No Response After Power On: Check for electricity suspension, broken fuse, or loose plug connection.
- Heating Interrupted/Beep: Indicates incompatible or missing cookware, or cookware not placed centrally.
- No Operation During Heating: Check if cookware is empty/too hot, or if air intake/exhaust vent is clogged.
- Error Codes:
- E0: Without cookware or incompatible cookware.
- E1: IGBT sensor open circuit/short circuit.
- E2: IGBT overheat.
- E3: Over-voltage (270V).
- E4: Under-voltage (90V).
- E5: Top plate sensor open/short circuit.
- E6: Top plate overheat.
- For E0, E5, check cookware suitability or restart after cooling. For E1, E2, E6, contact Service Centre. For E3, E4, check power supply and wait for it to normalize.
The product complies with the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). It must not be disposed of with normal household waste. Consumers should contact local authorities or retailers for correct disposal information. The crossed-out dustbin symbol on the product signifies separate collection obligations.
The manufacturer reserves the right to make modifications without advance notice, reflecting a commitment to product quality.
Need help?
To Next Page
General