This document is an instruction manual for the Livoo Ice Crusher, model DOM462. It provides detailed information on the device's specifications, assembly, usage, and maintenance.
The Livoo Ice Crusher is designed to crush ice cubes for various uses, such as making slush or other iced beverages. It is a compact appliance with a simple design, featuring a motor part, an ice container, and a transparent holder for the crushed ice.
Technical Specifications:
- Operating Voltage: AC 220-240V 50-60Hz
- Power: 30 W
- Capacity: 150 ml
- Operating Time: For 20mm square ice cubes frozen at -18°C, at two-thirds of the bowl capacity, the recommended operating cycle is 1 minute ON, followed by 3 minutes OFF, for a maximum of 5 cycles.
- Version: 1.4
- Language: English
Components and Assembly:
The ice crusher consists of several key parts:
- Main body (including motor): This houses the motor and the ice press plate.
- Motor part: The upper section that contains the motor and the crushing mechanism.
- Ice press plate: Located at the bottom of the motor part, it presses the ice against the blade.
- Ice container: A transparent container where ice cubes are placed for crushing.
- Blade: The cutting element located inside the ice container.
- Coarse and fine snow adjustable knob: A lever at the bottom of the ice container that allows adjustment of the ice consistency (fine or coarse).
- Transparent holder: The lower part of the appliance that collects the crushed ice.
- Bottom: The base of the transparent holder.
- Ice-maker box: A separate box used for preparing ice cubes.
- Power cord and plug: For connecting the appliance to the power supply.
Assembly Instructions:
- Place the machine on a flat, stable surface.
- Assemble the ice tank (container) and the clear stand (transparent holder) by aligning the arrows indicated on the parts.
- Ensure the ice adjustment lever at the bottom of the ice tank is set to the desired consistency (fine or coarse).
Usage Features:
Before using the ice crusher, it is necessary to have ice cubes ready. The manual suggests filling the provided ice container with water and freezing it for 10 hours, or using commercially prepared ice cubes. When filling, only use the ice maker box.
Operating the Ice Crusher:
- Take the ice preparation tank out of the freezer.
- Open the top cover and turn it upside down.
- Press down on the center of the ice maker box and pull out the ice block. If the ice is difficult to remove, partially soak the ice maker box in hot water to loosen it.
- Place the ice block in the bowl (ice container) of the appliance with the flat surface facing down.
- Place the motor block on the bowl filled with ice. Do not force it if the motor block lifts slightly due to the amount of ice.
- Plug in the machine.
- Push the press switch button (handle) to operate the crusher. The machine will stop automatically when the button is released.
Important Safety Instructions for Use:
- Always unplug the machine before fitting, removing, or cleaning parts.
- Ensure the voltage is compliant with the rating label and the socket's earthing is in good condition.
- Never touch moving parts or insert fingers/utensils into input/output channels.
- The appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience if supervised or instructed on safe use and understanding of hazards.
- This appliance is not to be used by children, and children should not play with it. Keep the appliance and cord out of reach of children.
- Do not use near flames, hot plates, or stoves.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons.
- Do not immerse the cord, plug, or unit in water or other liquids to protect against fire, electric shock, or personal injury.
- Always disconnect the appliance from the supply if left unattended, or before assembling, disassembling, or cleaning.
- Do not use outdoors.
- Never leave the machine unattended.
- Do not let the power cable dangle over table edges or sink units, and prevent contact with hot surfaces.
- Before use, check for foreign objects in the ice reservoir.
- Do not use accessories not recommended by the manufacturer.
- Do not insert metal sheets or other electrical objects into the appliance to avoid fire/short circuit.
- Switch off and disconnect from supply before changing accessories or approaching moving parts.
- Be careful when handling sharp cutting blades, emptying the bowl, and during cleaning.
- This appliance is intended for household and similar applications (staff kitchen areas, farm houses, hotels, motels, bed and breakfast environments).
- The appliance is not intended to be operated by an external timer or separate remote control system.
Maintenance Features (Cleaning and Storage):
- Do not use abrasive cleaning agents such as scouring pads, acetone, or alcohol.
- Switch off the appliance and unplug it before cleaning.
- Clean the ice shaving chamber and the bowl with soapy water.
- Warning: Be careful when handling the motor block cutting plate and the bowl blade due to sharp edges.
- Wipe the appliance surface with a soft damp cloth.
- Never put the appliance in a dishwasher.
Disposal:
The appliance must be disposed of according to European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). It should not be disposed of in normal household waste. Consumers should contact their local authority or retailer for information on correct disposal. The crossed-out dustbin symbol on the product indicates the obligation for separate collection.
LIVOO
BP 61071
67452 Mundolsheim - FRANCE
Product information is subject to change without prior notice.
Need help?
To Next Page
General