06
• Open the box and check availability of below accessories required for installation
- SS Ball Value and 3 Way connector
- Wall Mounting Plate
- Insert & Screw for Wall Mounting Plate
- PL4 Pipe White and Blue
- User Manual cum Warranty Card
- Power Adaptor
• Choose an appropriate water connection point.
• Please note water purifier unit should be connected to normal temperature water supply only. Hot water
supply is not recommended for water purifier connection.
• Fix 3 Way connector & SS Ball valve with the help of a pipe wrench at this water point to separate water
supply for water purifier Keep Ball Valve in Lock condition.
• Fix Mounting Plate at a suitable place on the wall near to Input Water Connection.
• Kindly ensure Fixing of Mounting plate is not inclined. On a inclined mounting plate unit will be hanged
inclined and it may result in float valve malfunctioning/water overflow from unit.
• Hang the unit on Mounting plate
• Connect Input Water pipe (White) at the inlet connector in the unit. Cut the excess pipe length; do not
fold/round it.
• Now Fix the Power Adaptor into a 3 Pin, 5A230VAC electrical socket.
Installation Instructions
To Next Page
Loading...
