llaza MONOBOX-400 User Manual

Page - Copyright Llaza, S.A. - May 2011
Technical Manual
MONOBOX-400

llaza MONOBOX-400 Specifications

General

Brand	llaza
Model	MONOBOX-400
Category	Accessories
Language	English

Summary

MONOBOX-400 System Description

Monobloc Technology and Support

MATIC System for Inclination Adjustment

MONOBOX-400 Key Components

Square Bar and Support Brackets

Articulated Arms and MATIC System

MONOBOX-400 Cutting, Selection, and Classification Tables

Material Properties and Cutting Dimensions

EN 13561 Wind Classification

Wind Classification and Motor Selection Guide

MONOBOX-400 Minimum Width and Bracket Configuration

Minimum Width Requirements

MONOBOX-400 Assembly Procedures

Cassette Assembly

Steps to assemble the cassette profile, side brackets, and attachment plates securely.

Rolling Tube and Fabric Installation

Installing the rolling tube, fabric, protective PVC sheet, and edging.

Arm and Bracket Preparation

Installing cam devices, attaching arm brackets to the square bar, and ensuring correct inclination.

Arm Levelling and Weather Cover

Adjusting arm height and installing the weather cover profile with its rubber strip.

Front Profile Installation

Attaching front end pieces and attachment plates, then sliding the profile into the fabric hem.

Adjustment and Levelling

Positioning slippers and joint-guard clips for smooth closing and preventing damage.

Double MONOBOX-400 Configuration

Connecting Second Cassette Profile

MONOBOX-400 Awning Installation

Wall or Ceiling Bracket Mounting

Installing bar brackets, anchoring the system, and attaching decorative and side covers.

Fabric Gap Cover Kit Installation

Final Installation Adjustments

Adjusting arm bracket bolts for desired inclination and locking the position using the stud.