Why is there no display on my Lloyd LWMT80TS Washer control panel?
If the control panel on your Lloyd Washer isn't displaying anything, there could be several reasons. First, check that the plug is inserted tightly into the socket. Second, verify that there is electricity in the socket. Third, make sure the power switch is turned on. Finally, check if the power supply to the washer has been cut off.
What to do if my Lloyd LWMT80TS Washer doesn't inlet water or stops spinning to inlet during the spin program?
If your Lloyd Washer isn't inletting water or stops spinning to inlet during the spin program, consider the following: * Ensure there is a water supply. * Open the tap completely. * Check if the inlet hose is blocked. * Balance the laundries inside the machine or ensure the machine is placed on a stable surface.
How to fix a Lloyd Washer that does not drain?
If your Lloyd Washer isn't draining, make sure the drainpipe is placed down correctly. Also, check the drainpipe to ensure it is not bent or blocked.
Why is the inlet hose leaking on my Lloyd LWMT80TS Washer?
If the inlet hose on your Lloyd Washer is leaking, it could be due to a loose connection. Ensure the inlet hose connector (connecting with the tap) is fixed tightly. Also, check that the connection between the inlet hose and the washing machine is secure.
Why does water flow from the drainpipe of my new Lloyd Washer?
If you notice water flowing from the drainpipe when using your Lloyd Washer for the first time, this is normal. It's just the remaining water from when the factory tested the appliance.
Details on repair/replacement coverage and exclusions for defective parts.
Factors that invalidate the washing machine's warranty, including misuse and unauthorized service.
Guidelines on proper plug insertion, handling power cords, and avoiding damaged sockets.
Advises against installation in damp areas and using hot water, plus importance of ventilation.
Warnings about not putting hands into the machine and preventing children from climbing on it.
Discourages altering specifications and outlines intended use by persons with full capabilities.
Advises against overloading, placing hot goods, and washing garments exposed to volatile chemicals.
Guidance on correct placement, ensuring stability, and adjusting feet for a level machine.
Step-by-step guide from initial power-on to starting the wash program, including function selection.
Instructions on installing, changing direction, and ensuring proper water drainage via the drainpipe.
Details on selecting suitable taps and connecting the inlet hose securely to the tap and machine.
How to select and use features like Low Noise, Water Recycle, and Child Lock.
Instructions for cleaning the lint filter, inlet gate, and exterior of the washing machine.
Solutions for issues where the control panel has no display or power is not active.
Addresses problems like inlet hose leaks, no draining, or failure to inlet water.
General| Type | Top Load |
|---|---|
| Washing Capacity | 8 kg |
| Function Type | Fully Automatic |
| Motor Type | Normal Motor |
| Spin Speed | 700 RPM |
| Water Level Selection | Yes |
| Child Lock | Yes |
| Inbuilt Heater | No |
| Energy Rating | 5 Star |
| Warranty | 2 Years |
To Next Page
