LMI Technologies Gocator 2330 - Delete File; User Storage Used; User Storage Free

Gocator Line Profile Sensors: User Manual
Protocols • 462
Delete File
The Delete File command removes a file from the connected sensor (a .job file, a component of a job file,
or another type of file; for more information, see Job File Structure on page 356).
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x1008).
name[64] char 6 Source file name.
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x1008).
status 32s 6
Reply status. For a list of status codes, see Commands on page
446.
Reply
User Storage Used
The User Storage Usedcommand returns the amount of user storage that is used.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x1021).
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x1021).
status 32s 6 Reply status.
spaceUsed 64u 10 The used storage space in bytes.
Reply
User Storage Free
The User Storage Free command returns the amount of user storage that is free.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x1022).
Command