LOBSTER SPORTS Elite User Manual

Elite Model, Pickle2 and Pickle 2.10
TS – My Elevation Is Not Working
Author: CT Contributors: JR,RR, JJ Orig. date: 9/20/10 Revised:4/11/2022
Objective: To troubleshoot elevation issues for Elite, EL0P2, EL0P2.10
Action
Pictures
1
To troubleshoot elevation issues for the EL0P2, and EL0P2.10
follow steps below.
Section 2,3. `´´Checking elevation Motor´´
(Go to this section if the elevation is not moving at all, or
moving in 1 direction, or moving just a little).
Section 4 ´´6 or 7 Flashing lights´´
(Go to this section if the Charged/Charging LED is giving 6 or 7
flashing lights, then a pause and then 6 flashing lights).
Section 5,6 ´´Removing Red Case´´
(Go to this section if the elevation moves freely and there is no
resistance on the motor itself).
2
Checking Elevation Motor
1. Unscrew control panel and pull it out
and to the side. Be careful not to
disconnect any additional wires.
2. Switch the elevation and feed
connections on the green electronic
board on the back of the control panel.
3. Turn on machine and press either
direction of the elevation button. If the
feed wheel does not turn this control
panel is failing, a new control panel
(EL52.P2, EL52.P2.10) is needed.
If the elevation is still not moving, please move onto the next
step below.
Control Panel – Open
Elevation & Feed Connections

LOBSTER SPORTS Elite Specifications

General

Brand	LOBSTER SPORTS
Model	Elite
Category	Sports & Outdoors
Language	English

Summary

Troubleshooting Elevation Issues

Checking Elevation Motor

Steps to diagnose elevation motor by checking connections and panel function.

Checking Elevation Switch

Procedure to test elevation switch connections to the circuit board for proper function.

Interpreting Flashing LED Codes

Diagnosing elevation problems indicated by 6 or 7 flashing lights on the LED.

Removing the Red Case

Instructions for safely removing the machine's red outer casing by unscrewing screws.

Removing the Yoke Assembly

Steps to detach the yoke assembly, including server wheels and yoke bolt.

Checking Link on Elevation Motor

Inspect the link connection to the elevation motor shaft for breakage or detachment.

Reattaching Yoke to Davit

Procedure for correctly reassembling the yoke assembly onto the davit.

Reinstalling Machine Case

Steps to correctly place and secure the machine's case after repairs.