LOBSTER AR-011M User Manual

AIR RIVETER
INSTRUCTION MANUAL
AR-011S
AR-011M
AR-011H
¡ Thank you very much for purchasing “LOBSTER” air riveter. To ensure correct operation, please
read this instruction manual carefully, and keep it in a safe place for later reference.
¡ This instruction manual contains information for models AR-011S, AR-011M and AR-011H.
Be sure to refer to information that is applicable to the model you are using.
¡
This is Original instructions. (Original Instruction Manual is written in English language.)
CONTENTS
IMPORTANT SAFETY
INSTRUCTIONS...........................1〜2
NOMENCLATURE .............................3
TECHNICAL DATA.............................3
PREPARATION BEFORE USE..........4
OPERATING THE AIR RIVETER ......5
MAINTENANCE ...........................6〜7
STORAGE ..........................................7
TROUBLESHOOTING .......................8
AR-011S PARTS TABLE ĠĠ9〜10
AR-011M PARTS TABLE ĠĠ11〜12
AR-011H PARTS TABLE ĠĠ13〜14
英語／ENGLISH
Professional model of air riveter to install blind rivets.
PRINTED IN JAPAN
International Marketing Department
12-8 Shijo-cho, Higashi-Osaka City
Osaka 579-8053, Japan
Telephone: +81(729)81-7466 Telefacs: +81(729)81-9420
e-mail: lobtex@riveter.com
URL http://www.riveter.com
MANUFACTURER
(?P+.//Q-K-F޸Ηل௿/.,3,04//8.6?KɚĘȸ/

LOBSTER AR-011M Specifications

General

Model	AR-011M
Category	Power Tool
Type	Angle Grinder
Power Source	Corded Electric
No-Load Speed	11000 rpm
Spindle Thread	M14

Summary

Important Safety Instructions

Nomenclature

Frame Head Internal Parts

Diagram illustrating the internal components of the frame head.

Technical Data

Preparation Before Use

Operating the Air Riveter

Maintenance

Jaw Maintenance

Procedure for cleaning and maintaining the jaws.

Cleaning and Filling the Cylinder

Steps for cleaning the cylinder and refilling hydraulic oil.

Storage

Troubleshooting

AR-011S Parts Table

Ordering Parts

AR-011M Parts Table

AR-011H Parts Table

Warranty & Service