LOCI IR D7 - USB Music Playback; AUX Music Playback; Settings and Features; Manual Date and Time Setup

and click it to connect.
3, Once connect successfully, it will show “Bluetooth Connected” on display.
4, Short Press ENTER button to play or pause the music. Turn the SKIP knob to go previous or next songs.
5, Long press ENTER button to disconnect Bluetooth, Long press ENTER button again to reconnect Bluetooth.
6, The device will search associated picture on internet for the song which is playing. Short press ◀▶button to zoom in and
out the picture.
USB music play
1, Insert USB flash drive, it will show USB connect symbol on top right side of display.
2, Press MENU button to enter Main menu ,then turn SKIP knob ( or press ◀▶) to select “Media Center” and
press ENTER button. Select “USB” and press ENTER button.
3, Turn SKIP knob to select the songs from USB and press ENTER button to play.
4, Press ▶button to select if delete the song. Press ◀button, back to superior menu.
5, Short Press ENTER button to play or pause the music.
AUX music play
1, Connect the device and your smart phone or MP3 player via 3.5mm Aux cable.
2, Press MENU button to enter Main menu ,then turn SKIP knob ( or press ◀▶) to select “AUX” , then
press ENTER button to confirm.
3, Play music from your smart phone or M3 player via the device IRD7.
Date&Time Setting
A- Under WIFI connection, the device will automatically synchronize the local time.
B- Manual clock setting :
1, Press MENU button to enter Main menu ,then turn SKIP knob ( or press ◀▶) to select “configuration” and
press ENTER button.
2, Turn SKIP knob to select “Date&Time” , then press ENTER button and turn SKIP knob to select “Set Date and
Time”. Press ENTER button→ select “Manual Setup”and press ENTER button→Enter into “Set Date and
Time” interface.
3, Turn SKIP knob to adjust the numbers , Press ▶button to confirm and go to month/year/minutes/hours setting.
Then Press ENTER button to confirm Date&Time setting.
4, Press MENU button to return Main menu.
Alarm clock Setting
This device can set 2 sets of alarms, operation as below:
1, Press MENU button to enter Main menu , then turn SKIP knob ( or press ◀▶) to select “configuration” and
press ENTER button.
2, Turn SKIP knob to select “Alarm” , then press ENTER button to enter Alarm setting.
3, Turn SKIP knob to select Alarm 1 / Alarm 2 / NAP Alarm / Alarm Volume.
For Alarm 1 / Alarm 2, you can set different Repeat days and different Alarm sound.