X1 Lock
X2 Shims(Small)
X2 Shims(Large)
X2 Templates
6PIN Connector
X1 Strike plate
X1 Faceplate
Screws Accessories:
X 8 Screws 4 x 8 mm
X 4 Screws 5 x 8 mm
X 4 Screws 4 x 15 mm
X 2 Screws 5 x 26 mm
Specifications
SL-133 DEADBOLT LOCK INSTALLATION MANUAL
Power Supply
Current
Operation Delay Time
Signal Output
Face Plate
Strike Plate
Bolt
Safety Measures
160(L) X 25 (W) X 34.5 (H) mm
90 (L) X 23 (W) X 2.5 (H) mm
16mm (Throw) X 12.7mm (Diameter)
(1)Fail-safe Type (Power to lock).
(2)Built-in photo couplers door open push button input contact. Door will lock
again automatically when door is not open within 5 seconds.
DC 12V / 1A
Operation Current : 880mA Holding Current :160mA
0sec.3sec.(adjustable by user)
N.C N.O(250mA) Dry contact
Connections
Wiring Diagram
Reader
Push Button
Orange
Brown
Red
Page 1
Brown
Orange
Red
-GND
+DC12V
Push Button
6-PIN
Color
Model
Yellow
Green
Blue
Door Position Sensor (N.C)
Door Position Sensor (COM)
Door Position Sensor (N.O)
Setting door lock delay timer
0Sec
3Sen
(Default)
AP-10
DC 12V
1A
Accessories
N.C
N.O
COM
When door is not closed,
detection output is COM
and N.O. Connected.
When door is closed,
detection output is COM
and N.C. Connected.
N.O.
N.C.
COM
N.O.
N.C.
COM
N.O.
N.C.
COM
Please switch on the appliance again to validate any adjustment of DIP switch value.
Lock C
ontrol - Zwaluwstraat 132 - 1840 Malderen - Belgium - Tel. +32 52 57 43 02 - info@lockcontrol.be - www.lockcontrol.be
Lock
Control - Kouterbaan 63 - 1840 Malderen - Belgium - Tel. +32 52 57 43 02 - info@lockcontrol.be - www.lockcontrol.be
To Next Page
Need help?
General