Lockdoor ZTGD1000 - User Manual

Chain/Belt Drive Garage Door Opener
To reduce the risk of injury to persons or damage to property
Please use this opener only with a one-piece or sectional residential door
INSTALLATION AND OPERATION MANUAL
Please save this manual for future reference
WARNING
Read all instructions and warnings before use. Failure to follow all instructions
may result in serious personal injury or product damage.

Summary

1, User Information

1-2, Important Safety Instructions

Critical instructions for safe operation and installation of the opener.

1-3, Important Safety Requirements and Regulations

Key safety regulations and requirements for proper installation.

3, Features and Benefits

5, Assembly

5-1, Assemble the rail and trolley(for a multi-part rail)

6, Installation

IMPORTANT INSTALLATION INSTRUCTIONS

Critical warnings and guidelines to follow before starting installation.

6-1, Determine the header bracket location

6-2, Install the header bracket

Detailed steps for mounting the header bracket to the wall or ceiling.

6-3, Attach the rail to the header bracket

6-4, Position the garage door opener

6-5, Install the door bracket

Instructions for attaching the bracket to the garage door.

6-6, Connect the door arm to the trolley

Steps to link the door arm to the trolley mechanism.

6-7, Install the protector system

Guide for installing the safety beam (protector system).

7, Adjustments

7-3, Setting the UP(Open) Travel Limit

Step-by-step guide to program the door's fully open position.

7-4, Setting the DOWN(Close) Travel Limit

Steps to program the door's fully closed position.

7-5, Adjust the Operating Force

7-5-1, Adjusting the Force of UP(Open)

7-5-2, Adjusting the Force of DOWN(Close)

7-6, Test the Safety Reversal System

Procedure for testing the automatic safety reversal feature.

7-7, Test the Protector System

How to test the safety beam (protector system).

8, Programming

8-1, Programming Remotes and Wireless Wall Mounted Remote(Optional on some models)

8-3, Programming Wireless Keypad (Optional on some models)

8-3-4, Programming with garage door opener

8-3-5, Changing a Combination

9, Clearing Remotes

10, Trolley User Manual

11, Troubleshooting

Lockdoor ZTGD1000 Specifications

General

Type	Chain Drive
Horsepower	1/2 HP
Speed	7 inches per second
Voltage	120V
Safety Features	Safety Sensors
Warranty	1 year limited