LockNet Sur-Lock I/O 2000L Series User Manual

Document Part # 1051-01 (Rev 021919) Page 1 of 16
Sur-Lock™
I/O 2000L Family of Exit Control Alarm Locks
Installation Instructions
IMPORTANT: Please read and follow these instructions carefully. If you are encountering
difficulty installing your new Sur-Lock™ or are having trouble understanding any part of these
instructions, please stop immediately and consult your dealer. Your satisfaction and your
safety are important to us and we have made every effort to see that these instructions are
clear and accurate.
305 Panic Hardware
U.S. Patent No. 5,410,900
©2019 LockNet, LLC
LockNet is a registered trademark of LockNet, LLC
Sur-Lock is a trademark of LockNet, LLC

LockNet Sur-Lock I/O 2000L Series Specifications

General

Brand	LockNet
Model	Sur-Lock I/O 2000L Series
Category	Locks
Language	English

Summary

Limited Warranty

Appendix A: Changing The Hand

Component Disassembly for Hand Reversal

Steps to remove battery bracket, lock bolt housing, and cotter pin for hand change.

Lock Bolt Rod and Housing Reinstallation

Reinstall lock bolt rod and housing on the opposite side for hand reversal.

Battery Wire Routing and Management

Reposition clip and route battery wires according to new component placement.

Appendix B: Exploded Diagram

Appendix C: Replacement Part Guide