1 Please Observe the Following
1.1 Emphasized Sections
WARNING!
Refers to safety regulations and requires measures to protect the operator and others from
injury or danger to life.
Caution!
Emphasizes what must be done or avoided so that the unit or other property is not
damaged.
Notice:
Gives recommendations for better handling of the unit during operation or adjustment, as
well as for service activities.
1.2 Items Supplied
1 LED Curing Array
1 Users Manual
1.3 Additional Items Required
1 LED power cable
1 LED Flood System Power Supply
1.3 For Your Safety
For safe and successful operation of the unit, read these instructions completely. If the
instructions are not observed, the manufacturer can assume no responsibility.
Be sure to retain this manual for future reference.
WARNING! Do not look directly into the LED/reflector array.
WARNING! Damage to the power cord, power supply housing or LED housing
can result in contact with live electrical parts. Check the power cord and housings
before each use. If the power cord or units are damaged, do not operate.
WARNING! The unit must be repaired only by a Loctite® authorized service
technician.
Caution! The light from the unit can heat surfaces it is directed towards. Care
must be taken to determine the proper offset distance and exposure time.
Caution! Do not block the fan or prevent air from passing through the heat sink.
Allow at least six inches from the fan and heat sink to any obstructions.
1.4 Field of Application, (Intended Usage)
The Loctite LED Flood Systems, UVA, 405 and Indigo™ are designed to be used with
Loctite® UV Curing products, UV/VIS curing products and Indigo products,
respectively.
To Next Page
Loading...