How to troubleshoot Loctite Tools when power does not come on?
If the Loctite Tools power does not come on, first check the wall circuit to ensure there is voltage present. If the circuit is working, the issue may be a defective fuse, which needs to be replaced.
What to do if Loctite Zeta 7735 Tools shutter mechanism works but no light is emitted?
If the shutter mechanism of your Loctite Tools is opening and closing, but no light is emitted, the lamp may have failed. Replace the lamp module to resolve this issue.
What to do if Loctite Zeta 7735 Tools power is on, but no light, and the shutter makes no noise?
If the power is on but no light is emitted from the light guide and the shutter mechanism makes no noise when the foot switch is engaged on your Loctite Tools, the foot switch may not be plugged in properly. Check the foot switch connection to ensure it is securely connected.
To Next Page
General