6
2. SPECIFICATIONS
Output Voltage 0 – 30V, Coarse and Fine adjustment
Output Current 0 – 3A, Coarse and Fine Adjustment
Line Regulation ≤ 0.01% + 3mV
Load
Regulation
≤ 0.01% + 3mV (≤ rating current)
Ripple & Noise
≤ 1mVrms, 5Hz to 1MHz (rating current ≤
3A)
Temperature
Coefficient
≤ 300 ppm/°C
Constant Voltage
Mode
Recovery Time
<
100µS (50% load change, minimum
load 0.5A)
Line
Regulation
≤ 0.2% + 3mA
Load
Regulation
≤ 0.2% + 3mA
Constant
Current Mode
Ripple &
Noise
≤ 0.3mA RMS
3 digit 0.56” LED display
Red LEDs for Voltage, Green LEDs for Current
Display
Accuracy ≤ 0.5% of reading + 2 digits
General:
Power
Requirements
AC 110V/220V ±10% selectable, 50/60Hz, 210W
Operating
Environment
Operation: 0° to +40° C, 75% R.H.
Storage: -15° to +70° C, 85% R.H
Accessories
included
AC Line Cord
Instruction manual
Fuse
1 set of test leads
1 Earth Ground bus strap
Dimensions
(W x H x D):
127 x 152 x 292 mm
(5 x 6 x11.5”)
Weight: 4Kg (8.8 lbs.)
Specifications and information provided are subject to change without notice.
Please visit www.lodestarelectronics.com for the most current product information.
To Next Page
Loading...