To Next PageTo Next Page
Need help?Do you have a question about the Loewe Planus 4781 ZP and is the answer not in the manual?
Essential safety guidelines for handling electronic devices and preventing hazards.
Guidelines for safety, general repairs, and service procedures.
Important safety notes regarding handling and repair.
General safety measures for device handling and repair.
Procedures for accessing and navigating the television's service and diagnostic menus.
Diagrams and schematics for the remote control and various control unit boards.
General safety rules for handling and repairing electronic devices.
Guidelines for protecting components from electrostatic discharge during handling and transport.
Rules for repairs, modifications, testing, and using original replacement parts.
Specific troubleshooting tips for the MediaPlus signal board.
Guidelines for electrostatic shielding and safety regulations.
Steps for signal board preparation and troubleshooting notes.
Steps for signal board repair and specific maintenance information.
Steps for signal board repair and specific repair notes.
Notes for signal board repair and troubleshooting.
Guidelines for electrostatic protection and safety regulations.
Notes on electrostatic protection and safety instructions.
Wiring diagram for SAT tuner and DVB free decoder connections.
Wiring diagram illustrating connections to the signal and basic boards.
Wiring diagram for Chassis MediaPlus, DVB, TVO, and Twin SAT VI systems.
Instructions for entering the TV's service mode using the remote control.
Explanation of remote control buttons for service mode operations.
Accessing system data, geometry, cutoff, and white drive settings.
Adjusting PIP, other parameters, and configuring option bytes.
Overview of service mode function and procedure for EAROM variable comparison.
Instructions for entering the service mode and basic routine display.
Guidelines for adjusting vertical and horizontal geometry parameters.
Overview of service mode for EAROM verification and PC/TV programmer use.
Procedure for activating service mode and initial display.
Controls for TV operation, including power, program selection, and volume.
General