Lofrans THETIS 7003 - User Manual

Accessori Elettrici
Electric Accessories
CONSERVARE QUESTO MANUALE A BORDO
STORE THIS MANUAL ON BOARD
CONSERVER CE MANUEL À BORD
DIESES HANDBUCH AN BORD AUFBEWAHREN
GUARDAR ESTE MANUAL A BORDO
Via Philips, 5 - 20052 Monza (MB) (Italy) - www.lofrans.com - e-mail: contact@lofrans.com
MANUALE DI INSTALLAZIONE E D’USO - INSTALLATION AND USER’S MANUAL
MANUEL D’INSTALLATION ED D’UTILISATION - MANUAL DE INSTALACIÓN Y USO
INSTALLATION UND BEDIENUNG
UK
IT
FR
DE
ES
THETIS 7003
3
Years Limited
Warranty
2
Years Limited
Warranty

Summary

Introduction

Purpose of the manual

Provides information on safety and correct use of the product, emphasizing warnings to avoid accidents or damages.

Assistance

Information on obtaining support through Lofrans' authorized distributors and website.

Receipt and Storage

Instructions for verifying package integrity upon receipt and storing the product in a dry, protected place.

General notes

Specifies the intended use of the THETIS 7003 chain counter and warns against tampering.

Technical Data

Specifications

Details receiver and transmitter specifications, including power supply, temperature, size, and communication range.

General dimensions

Illustrates the physical dimensions of the remote control unit.

Contents of the package

Lists all items included in the Radio Control Chain counter package.

Federal Communication Commission Interference Statement

Installation

Installing the magnet on the anchor windlass

Step-by-step guide for attaching the magnet to the windlass gypsy, including drilling and fixing methods.

Installing the magnetic sensor for horizontal shaft anchor windlasses

Instructions for mounting the magnetic sensor and its support for horizontal shaft anchor windlasses.

Installing the chain counter

Guidance on positioning the chain counter display and securing it, along with electrical connection advice.

Menu

Starting up

Explains the initial display and button functions (ON, UP, DOWN) upon powering the chain counter.

Chain counter setting menu

Details navigation and modification within the instrument's setting menus.

Measurement menu

Describes options for turning off, resetting measurement, and selecting units (feet/metres).

Alarm and functions menu

Covers setting the 'Up Alarm' height and reverting to factory default settings.

Settings menu

Options for adjusting display contrast, backlight time, and keyboard beep.

Language menu

Allows selection of the display language for the remote control unit.

Sensor calibration menu

Procedure for entering the gypsy circumference for accurate chain measurement.

Check menu

Includes options to check software version, operation time, sensor status, and LCD display.

Use

Measurement reset

Explains how to reset the chain measurement value to zero via the Measurement menu.

Troubleshooting

Wiring Diagram

Warranty Conditions

Conditions and limitations

Outlines Lofrans' responsibilities, limitations, and conditions for warranty claims.

Exceptions

Specifies items and conditions not covered by the warranty, such as electrical boards and charter boat usage.

Liability

Defines warranty coverage regarding product non-conformity, excluding incidental or consequential damages.

Procedure

Details the process for submitting a warranty application via the Lofrans website.

Termination clause

States that the invalidity of one clause does not affect the validity of other warranty clauses.

Conformity

Specifies that the warranty is governed by Italian laws with jurisdiction in Milan.

Lofrans THETIS 7003 Specifications

General

Brand	Lofrans
Model	THETIS 7003
Category	Measuring Instruments
Language	English