Need help?Do you have a question about the Loftek Nova Power and is the answer not in the manual?
Crucial warnings regarding electrical shock, explosion, fire, injury, and property damage.
Instructions on keeping the product dry, avoiding damage, and proper disassembly.
Guidelines for charging/operating temperatures and minimum battery charge for jump starting.
The main jump starter device included in the package.
Cables with positive and negative clamps for connecting to a vehicle battery.
Cable for charging external devices or recharging the jump starter.
The accompanying manual providing product instructions and information.
Identifies key parts of the jump starter, including ports, buttons, and indicators.
Instructions to prevent damage from continuous charging after full capacity.
Guidance on avoiding excessive battery discharge to maintain capacity and lifespan.
Advice on stopping operation in high temperatures to prevent damage.
Turn on the unit and ensure it has at least 50% charge.
Connect clamps to the jump starter and car battery, ensuring correct polarity and indicator lights.
Instructions on starting the car engine after connecting the jump starter.
Safely remove the jumper clamps after the car has started.
Warning against connecting positive and negative clamps together to avoid dangerous short-circuiting.
Emphasizes confirming correct connection of clamps to battery terminals to prevent vehicle damage.
Guidelines on current limits, checking vehicle voltage, and avoiding damage to the starter.
Recommendations for intervals between starting attempts and not charging immediately after use.
Advise to turn off unnecessary vehicle accessories before jump starting.
Detects and protects against short-circuited clamps, indicated by a red light and buzzer.
Protects against incorrect clamp connection to battery terminals, indicated by red light and buzzer.
Automatically disconnects output during reverse charge, indicated by flashing traffic lights.
Triggers if connected to start port with incorrect voltage, indicated by a constant red light.
Automatically disconnects clamps if they overheat (above 80°C), indicated by a red light.
Long press the function button for 3 seconds to turn the light on or off.
Short press the function button to cycle through SOS and Strobe modes.
Connect your phone or other devices to charge them using the jump starter's ports.
Connect the jump starter to a power source to recharge its internal battery.
Simultaneous charging and recharging of the device is not supported.
Do not start the car engine while the jump starter is being recharged.
Specifies the voltage required for jump starting.
Details the input power requirements for charging the jump starter.
Lists the specifications for the USB output ports (e.g., 5V/2.1A, 5V/3A).
Provides starting current and peak current values for jump starting.
Specifies the DC output capability of the jump starter.
Details the 12-month manufacturer warranty and contact information for support.
日本語で記載された始動電圧の仕様。
日本語で記載された入力電力の仕様。
USB出力ポートの仕様。
日本語で記載された始動電流とピーク電流。
日本語で記載されたDC出力の仕様。
General| Type | Remote Starter |
|---|---|
| Model | Nova Power |
| Engine Start | Yes |
| Keyless Entry | Yes |
| Security System | Yes |
| Battery Life | 1 year (typical usage) |
| Operating Temperature | -40°F to 176°F |
To Next Page
