Identification
Adjust Point Depth
Increase drive tension for hardwoods and
decrease for softwoods.
Loading Points
1. Press release button
2. Pull up cover
3. Install point strips with point facing forward
4. Slide cover closed
Instruction Sheet
Dual DrivE Elite
www.logangraphic.com
Model F500-2
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 L0166N 1/10
See the entire line of Logan DIY Picture Framing Tools and Mat
Cutting Equipment at www.logangraphic.com or call 1-800-331-6232
for more information.
Operation
1. Hold outside of frame
2. Press driver nose against inside frame
3. Keep drive flat on material - DO NOT LIFT OR
ANGLE
4. Squeeze trigger to insert point
5. Space points 6” apart, 3” from corners
Replacement Points
Use only Logan Points
F53 - Flex (600) F54 - Rigid (600)
F55 - Flex (2500) F56 - Rigid (2500)
Point Jammed
1. Remove points
2. Remove nose screw and nut
3. Remove nose piece and discard jammed point
P I C T U R E F R A M I N G
Point Driver
Point
Loading
Cover
Point Depth Adjustment
Adjustment Screw
3.
3.
2.
2.
1.
1.
Cover Release Button
Nose
Trigger
To Next Page
Need help?
General