9
Note:
) and you need to trigger the • If you fail to connect to “bun hygro” hotspot within 3 minutes, session will expire following with two (2) long beeps (like phone line busy signal:
hotspot with magnet again.
• If your “bun hygro” successfully connects to your Wi-Fi, it will connect to server and become activated automatically. In this case you will hear (4) short quick beeps (like: . . . .)
) which means you need to repeat • If for any reason your device fails to connect to Wi-Fi or server, device will inform you by (2) long beeps (like phone line busy signal: the
procedure again.
To Next Page
Loading...