17
Adjusting the Feet
The cooker stands on 4 levelling legs. As the levelling legs are adjusted at lower position, it is required to control
whether the product is levelled before operating it. This adjustment can be made by turning the levelling leg
clockwise to raise the cooker, if required. It is possible to raise the product a maximum of 30mm via the levelling
leg. If the levelling legs are adjusted appropriately, the product must NOT be moved by dragging. The cooker
must always be moved by lifting it up. The levelling leg can be adjusted by hand or a metal plate of the correct
size to fit the slot.
Level the cooker by screwing the bottom of the feet in or out, as shown.
Moving the Cooker
Using the fitted adjustable feet is MANDATORY. For safety reasons and to ensure adequate
ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
• Two people must always raise the cooker, as shown, to
prevent damaging the adjustable feet.
• Do not lift the cooker by the door handles.
• DO NOT DRAG the cooker. Lift the feet clear of the floor.
* All images are for indication only; please refer to your individual unit for actual item.
LFTC60W_A12_IB_120604_Annie.indd 17 12年6月4日 下午7:10
To Next Page
Loading...