EasyManua.ls Logo

Logik L32LW783 - Navigating the Analogue TV Menu System; Picture Menu; Mode; Brightness;Contrast;Colour;Sharpness;Tint

Logik L32LW783
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 29 -
After APS is nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
. .
Navigating the Analogue TV
Menu System
For displaying
menu options
To confirm choices
For navigation
• Press “ M ” to display the main menu.
• Press “
” or “ ” button to select an icon.
• Use “ ” or “ ” button to highlight.
• Press “
” or “ ” buttons to change the
settings.
• Press “ ” for more options.
• Press OK to store.
• To exit the menu or return from sub-menu
screen, press “ M ”.
Note : These explanations are valid for the navigation
of the analogue TV menu system. To select options
that are explained in the following parts, refer to
“Navigating the Analogue TV Menu System”.
Analogue TV Menu System
Picture Menu
Mode
For your viewing requirements, you can set the
related mode option.
Press “
” or “ ” button to select Mode . Press
” or “ ” button to choose from one of these
options: Cinema , Dynamic and Natural . .
Brightness/Contrast/Colour/Sharpness/
Tint
Press “ ” or “ ” button to select the desired
option. Press “ ” or “ ” button to set the level.
Note : Hue option can only be visible when the TV
receives an NTSC signal.
Colour Temp
Press “ ” or “ ” button to select Colour Temp .
Press “ ” or “ ” to choose from one of these
options: Cool , Normal and Warm .
Note :
• Setting Cool option gives white colours a slight
blue stress.
• Setting Warm option gives white colours a slight
red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture
is noisy, use Noise Reduction setting to reduce
the noise amount.
Press “
” or “ ” button to select Noise
Reduction. Press “
” or “ ” to choose from one
of these options: Low , Medium , High or Off .
[GB]_MB35_IDTV-PANEU_BRONZE1_3297W_1072UK_10059976.indd 29[GB]_MB35_IDTV-PANEU_BRONZE1_3297W_1072UK_10059976.indd 29 17.11.2008 08:34:4117.11.2008 08:34:41

Table of Contents

Related product manuals