EasyManuals Logo

Logik LID45W13N User Manual

Logik LID45W13N
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
GB
45
General Problems
Problem Possible Causes Remedy
White residue is visible on
cutlery and crockery, clouding
occurs on glassware; film can
be wiped off.
Not enough rinse aid was
used.
Replenish the reservoir, adjust the
rinse aid dispenser dial to a higher
setting or change the brand of rinse
aid.
There is not enough salt in the
salt reservoir.
Fill the salt reservoir.
The salt reservoir cap has not
been screwed on correctly.
Ensure that it is screwed back on
correctly.
Unsuitable detergent has been
used.
Change your detergent. Use a
dishwasher standard powder
detergent.
The salt consumption setting
is too low.
Select a higher salt consumption
setting.
Glassware is dull and
discoloured; film cannot be
wiped off.
The glassware is not
dishwasher proof. The surfaces
are affected.
Wash the non-dishwasher proof
glassware by hand.
Tea or lipstick stains have not
been completely removed.
The wash temperature of the
selected programme was too
low.
Select a programme with a higher
wash temperature.
The bleaching effect of the
detergent used is too low.
Change your detergent.
Forgot to pre-rinse or remove
the stains with a napkin prior
to washing.
Pre-rinse or remove the stains with a
napkin prior to washing.
LID45W13N_IB_131028_Zell.indb 45 28/10/13 11:01 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LID45W13N and is the answer not in the manual?

Logik LID45W13N Specifications

General IconGeneral
BrandLogik
ModelLID45W13N
CategoryDishwasher
LanguageEnglish

Related product manuals