Logik MZB 15 SS - User Manual

Questions and Answers

S
Shirley MarshallAug 1, 2025
Why is my Logik MZB 15 SS Ice Maker not making ice?
- G
  gsmithAug 1, 2025
  If the Logik Ice Maker isn't producing ice despite running normally, it could be due to high ambient or water temperature. Try moving the unit to a cooler area if the surrounding temperature is above 32°C and replace the water in the tank with cooler water. If this doesn't resolve the issue, it may be due to refrigerant liquid leakage or a blocked pipe in the cooling system, in which case you should contact a service agent.
A
Alexandra ColemanAug 7, 2025
What to do if the “Water” & “Ice” lights are flashing on my Logik MZB 15 SS?
- R
  Richard RogersAug 7, 2025
  The flashing “Water” & “Ice” indicator lights on your Logik Ice Maker usually mean that the ice shovel is obstructed. Inspect the shovel and remove any obstructions. If the issue persists, it is recommended to consult a qualified technician.
R
Roy HortonAug 12, 2025
Why is the “Ice” light on my Logik MZB 15 SS?
- F
  Frank BrooksAug 12, 2025
  The “Ice” indicator light on your Logik Ice Maker turns on when there is too much ice in the ice basket. To resolve this, simply remove some ice from the basket.
T
Terri AyersAug 19, 2025
How to stop ice cubes from sticking together in my Logik Ice Maker?
- L
  Lindsey GloverAug 19, 2025
  If the ice cubes from your Logik Ice Maker are sticking together, it could be because the ice cycle is too long or the water temperature in the inner tank is too low. Stop the ice maker, let the ice blocks melt, and then restart it, selecting the small ice button. Also, change the water in the inner tank, ensuring its temperature is between 8°C and 32°C.
K
kaguirreAug 25, 2025
Why is the “Water” light on my Logik MZB 15 SS Ice Maker?
- C
  csparksAug 26, 2025
  The “Water” indicator light on your Logik Ice Maker means that the water reservoir is empty. Stop the ice maker, fill the reservoir with water, and then restart the appliance.