Logitech G G502 HERO User Manual

10 English
Onboard proles
The G502 has three precongured proles, one
each for high sensitivity gaming, low sensitivity
gaming, and standard mouse usage. Use Button
9 (see mouse drawing) to rotate through
these default proles. When you change proles,
the DPI indicator lights will change color to
blue for three seconds and will indicate the new
mode as shown here:
DPI indicators
DPI values are shown using the three LEDs
indicated in the mouse drawing. The image
below shows which DPI value is being indicated
by the LED panel.
Prof. 1 Prof. 2 Prof. 3
DPI 1 DPI 2 DPI 3 DPI 4 DPI 5
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.

Logitech G G502 HERO Specifications

General

Sensor	HERO
DPI	100 - 25, 600
Buttons	11
Max Acceleration	> 40 G
Max Speed	> 400 IPS
USB Report Rate	1000 Hz (1ms)
Cable Length	2.1 m
Microprocessor	32-bit ARM
Connection Type	Wired
Mouse Feet	PTFE
Dimensions	132 mm x 75 mm x 40 mm
Weight	121 g
RGB Lighting	Yes
Weight Adjustment	Up to 18 g (5 x 3.6 g)
Onboard Memory	Yes, 5 profiles