Installing/Uninstalling Logitech desktop for Bluetooth on my computer
Introduction
The SetPoint™ software provided with your Logitech
product contains a
Bluetooth
stack
1
that allows your mouse, keyboard and other Bluetooth
devices
to connect to your computer through the Bluetooth
wireless hub.
In most cases you should install the SetPoint software and use the Bluetooth
wireless hub to connect your Bluetooth
devices to your computer. However there
are certain situations where this may not be advisable. You may, for example, want
to use your computer’s existing Bluetooth
support rather than the Logitech
wireless hub. In such cases, a different approach is required.
This guide explains how you check whether your computer has existing Bluetooth
support, and recommends the software you should install and the hardware you
should use with your setup.
We strongly recommend that you read this guide before installing the SetPoint
software on your computer.
1
A Bluetooth
‘stack’ is the software that allows Bluetooth
devices to be recognized and connect to your
computer.
© 2003 Logitech, Inc.
3
To Next Page
Need help?
General
