8 English
PAIRING A REMOTE CONTROL
TO R A L LY
RALLY and the remote control are
paired at the factory. You can pair up
to 5 remote controls to RALLY to make
it easier to control the system in larger
rooms. Or, if you need to pair a remote to
the camera, such as when replacing a lost
remote, do the following:
1. Press and hold the button on
the camera until the LED ashes.
2. Press and hold the button on
the Display Hub until the LED ashes.
3. Press and hold the Bluetooth button
on the remote control until the LEDs
on both the camera and Display Hub
stop ashing.
4. If the pairing fails, repeat from step 1.
CAMERA SETTINGS
APPLICATION
Use this program to control the camera
pan, tilt, zoom, focus, and image quality
(like brightness and contrast) from
your computer. The software can be
downloaded from www.logitech.com/
support/Rally.
To Next Page
Loading...
