2
On / O
1. Connect ConferenceCam
Connect to external power.
Although ConferenceCam Connect
comes with rechargeable battery,
it must first be plugged into external
power and charged till the green
battery light displays.
Note: The device can also be charged
through USB on your PC or Mac
(charging times may vary.)
2. Press and hold power On/O
button to turn on the device.
A sound will play and the device
LEDs will light for 2-3 seconds,
with the last used mode LED
staying lit when on.
3. Select the following modes
and follow the instructions
to get started.
To Next Page
Loading...
