Logitech Elite 85T - Logi Tune; Sleep Settings; Reconnect Earbuds; Factory Reset

LOGI TUNE
Logi Tune helps boost your earbud performance
withperiodic software and rmware updates.
Learn more and download Logi Tune at
www.logitech.com/tune, the Apple App Store
®
orGooglePlay™ store.
SLEEP SETTINGS
By default, your earbuds will automatically power o
when not in use for one hour. Adjust the sleep settings
inLogi Tune.
RECONNECT EARBUDS
Reconnect earbuds to receiver via Logi Tune
1. Plug USB-A receiver into computer.
2. Open Logi Tune.
3. Select the receiver from the dashboard.
Press“Reconnect earbuds”.
4. To initiate Bluetooth
®
pairing, press and hold
theBluetooth
®
pairing button in the charging case
for 3seconds. The light indicator on thereceiver will
ashwhite.
5. Once successfully paired, the light indicator
onthereceiver will remain solid white.
FACTORY RESET
1. Place the left and right earbuds in the charging case.
2. Long press the Bluetooth
®
pairing button in the case.
The middle case light indicator will blink in white.
3. All three case light indicators will blink inwhite
toconrm the reset.
www.logitech.com/tune
Logi Tune
11 English