Adjusting Vibration Strength (CONFIG MODE)
Triangle/Y key is for increasing vibration strength. You will see a flashing yellow light and
hear a higher pitch sound once the key is pressed.
Cross/A key is for decreasing vibration strength. You will see a flashing red yellow and hear
a lower pitch sound once the key is pressed.
Adjusting FFB Strength (CONFIG MODE)
Circle/B key is for increasing Force Feedback strength. You will see a flashing blue light and
hear a higher pitch sound once the key is pressed.
Square/X key is for decreasing Force Feedback strength. You will see a flashing blue light
and hear a lower pitch sound once the key is pressed.
You can press SHARE+OPTIONS（PS4 platform）keys again on your controller to exit the
CONFIG MODE, and return to PLAY MODE. All the changes will be saved in the activated
configuration during the exiting. If you do not exit the CONFIG MODE, all changes will be
lost.
5. Change Keymapping
The buttons on steering wheel can also be remapped both in Cross Hair Manager and in
Config Mode.
5.1 Change Keymapping in Cross Hair Manager
To Next Page
Loading...
Need help?
General
