Logitech G502 X LIGHTSPEED Setup Guide

4 ENGLISH
logitechG.com/ghub
3 The LIGHTSPEED Wireless USB-A receiver is below the mouse
inthe product tray.
Plug the USB-A cable connector into your PC and the USB-C
connector into the receiver extension adapter. Plug the USB-A
receiver into the adapter.
– The LIGHTSPEED Wireless receiver can also be plugged
directly into your PC, but using the cable and extension
adapter will ensure a better connection and easy access
tothe cable when you need to charge your mouse.
4 Slide the power button up to turn on your mouse.
5 Download Logitech G HUB gaming software to personalize
your G502 X mouse. Fine tune to suit your playstyle,
personalityand each of your games, assign commands
toanyof the 13 controls, and more.

Logitech G502 X LIGHTSPEED Specifications

General

Sensor	HERO 25K
DPI Range	100 - 25, 600
Max Acceleration	40G
Max Speed	400 IPS
USB Report Rate	1000 Hz (1ms)
Wireless Technology	LIGHTSPEED Wireless
RGB Lighting	Yes, LIGHTSYNC RGB
Onboard Memory	Yes
Switch Type	Hybrid Optical-Mechanical Switches
Connectivity	Wireless
Buttons	13 programmable buttons
Dimensions	131.4 mm x 79.2 mm x 41.1 mm