TIP: For gaming accuracy, we recommend leaving this unchecked, but you can
enable it if you prefer the feel of default Windows acceleration.
On-Board Memory
In On-Board Memory mode, all of the customizations you make will be written directly to the
mouse. You can utilize the on-board memory customizations while the mouse is connected over
Bluetooth.
Your gaming mouse supports these pointer customizations in On-Board Memory mode:
DPI levels — Configure up to five levels, from 200-12000 in 50 DPI increments.
Report rate (Performance mode only) — Update from 125/sec (8ms response time) to
1000/sec (1ms response time).
To customize pointer settings:
1. Open LGS
2. In the Home window, make sure the blue toggle marker is set to On-Board Memory,
and then click the glowing pointer-gear icon.
The customize on-board profile window appears:
To Next Page
Loading...
