Logitech G633 - Alternate PlayStation 4 Setup; USB Powered Operation; PlayStation Settings

Logitech® G633 Artemis Spectrum
11 English
Alternate setup
for Sony PlayStation® 4
USB powered operation
1. Set the mode switch to PC mode.
2. Connect the headset to the console
using the USB cable.
Note: although set in PC mode, buttons do not
operate when connected to the PlayStation 4.
Programming of lighting and buttons is not
possible on the PlayStation 7.1 surround sound
is not available while connected to PlayStation.
Volume wheel does not work on PlayStation.
PlayStation setup (settings)
1. Plug in headset via USB or 3.5mm cables
2. Open Settings
3. Select “Sound and Screen”
4. Select “Audio Output Settings”
5. Set “Output to Headphones”
to “All Audio”
USB
1
2