Logitech G915 LIGHTSPEED User Manual

G915 LIGHTSPEED FAQs 14
3. Click Add device, select the Logitech device you want to connect to, and then click
Pair.
4. Follow the onscreen instructions to finish pairing.
Windows 10
1. Select the Windows icon, then select Settings.
2. Select Devices, then Bluetooth in the left pane.
3. In the list of Bluetooth devices, select the Logitech device you want to connect to and
select Pair.
4. Follow the onscreen instructions to finish pairing.
Windows 8
1. Go to Apps, then find and select Control Panel.
2. Select Devices and Printers.
3. Select Add a device.
4. In the list of Bluetooth devices, select the Logitech device you want to connect to and
select Next.
5. Follow the onscreen instructions to finish pairing.
NOTE: It may take up to five minutes for Windows to download and enable all drivers,
depending on your computer's specifications and your internet speed. If you have not been
able to connect your device, repeat the pairing steps and wait a while before you test the
connection.
macOS
1. Open System Settings and click Bluetooth.
2. Select the Logitech device you want to connect to from the Devices list and click
Connect.
3. Follow the onscreen instructions to finish pairing.
Upon pairing, the LED light on your Logitech device stops blinking and glows steady for 5
seconds. The light then turns off to save energy.

Logitech G915 LIGHTSPEED Specifications

General

Connection Type	LIGHTSPEED Wireless, Bluetooth, USB
Switch Type	GL Tactile, GL Linear, GL Clicky
Battery Life	30 hours (100% brightness)
Keycap Material	ABS
Actuation Point	1.5 mm
Actuation Force	50 g
Total Travel Distance	2.7 mm
Wireless Range	Up to 10 meters
Dedicated Media Controls	Yes
Compatibility	Windows 7 or later, macOS 10.11 or later
Backlighting	RGB (LIGHTSYNC RGB)
Dimensions	475 mm x 150 mm x 22 mm (18.7 in x 5.9 in x 0.9 in)
Weight	1025 g
Keyboard Layout	Full Size
Onboard Memory	Yes
Programmable G-keys	5